Wood drying may be described as the art of ensuring that gross dimensional changes through shrinkage are confined to the drying process. Ideally, wood is dried to that equilibrium moisture content as will later (in service) be attained by the wood. Thus, further dimensional change will be kept to a minimum.

It is probably impossible to completely eliminate movement in wood, but this may be approximated by chemical modification. This is the treatment of wood with chemicals to replace the hydroxyl groups with other hydrophobic functional groups of modifying agents (Stamm, 1964). Among all the existing processes, wood modification with acetic anhydride has considerable promise due to the high anti-shrink or anti-swell efficiency (ASE) attainable without damaging the wood properties.

Source: Wikipedia

Air drying

Air drying is the drying of timber by exposing it to the air. The technique of air drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations, in a clean, cool, dry and shady place. Rate of drying largely depends on climatic conditions, and on the air movement (exposure to the wind). For successful air drying, a continuous and uniform flow of air throughout the pile of the timber needs to be arranged (Desch and Dinwoodie, 1996).

Kiln drying

The process of kiln drying consists basically of introducing heat. This may be directly, using natural gas and/or electricity or indirectly, through steam-heated heat exchangers, although solar energy is also possible. In the process, deliberate control of temperature, relative humidity and air circulation is provided to give conditions at various stages (moisture contents or times) of drying the timber to achieve effective drying.

Source: Wikipedia

Incoming search terms:

• artificial drying logs for building
• artificial drying of timber
• drying timber
• natural drying of timber
• natural drying timber
• The definition or air drying is the drying of timber by exposing it to the air The technique of air drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations in a clean cool dry and sha
• timber ( artifical drying)
• what artificial drying timber

Kiln drying provides a means of overcoming the limitations imposed by erratic weather conditions. In kiln drying as in air drying, unsaturated air is used as the drying medium. Almost all commercial timbers of the world are dried in industrial kilns.

The significant advantages of conventional kiln drying include higher throughput and better control of the final moisture content. Conventional kiln and solar drying both enable wood to be dried to any moisture content regardless of weather conditions. For most large-scale drying operations solar and conventional kiln drying are more efficient than air drying.

Compartment-type kilns are most commonly used in timber companies. A compartment kiln is filled with a static batch of timber through which air is circulated. In these types of kiln, the timber remains stationary. The drying conditions are successively varied from time to time in such a way that the kilns provide control over the entire charge of timber being dried. This drying method is well suited to the needs of timber companies, which have to dry timbers of varied species and thickness, including refractory hardwoods that are more liable than other species to check and split.

Source: Wikipedia

The desired objective of an appropriate schedule is to ensure drying timber at the fastest possible rate without causing objectionable degrade. The following factors have a considerable bearing on the schedules.

   1. The species; because of the variations in physical, mechanical and transport properties between species.
   2. The thickness of the timber; because the drying time is approximately inversely related to thickness and, to some extent, is also influenced by the width of the timber.
   3. Whether the timber boards are quarter-sawn, back-sawn or mixed-sawn; because sawing pattern influences the distortion due to shrinkage anisotropy.
   4. Permissible drying degrade; because aggressive drying schedules can cause timber to crack and distort.
   5. Intended use of timber; because the required appearance of the timber surface and the target final moisture contents are different depending on the uses of timber.

Considering each of the factors, no one schedule is necessarily appropriate, even for similar loads of the same species. This is why there is so much timber drying research, including this work, focused on the development of effective drying schedules.

Source: Wikipedia

Incoming search terms:

• kiln drying schedules
• kiln drying timber schedules